The following table shows the light output colour effect according to the programme (only RGBW).
7.2 MASTER configuration
To set up the unit as MASTER the same instructions for the set up as AUTOMATICR must be followed (see paragraph
9.1 AUTOMATIC configuration).
7.3 SLAVE configuration
To set up the unit as SLAVE set the 5 channels (RGBW) or 3 channels (DW) DMX mode with address 001.
In the FIXED COLOURS mode, it is possible to manually turn on the LEDs, without the use of a DMX.
In this mode, the projector also behaves as a master and can control a number of projectors SLAVE.
8.1 RGBW MASTER configuration
The FIXED COLOURS mode ONLY works when 5 channels DMX mode is set.
To activate the FIXED COLOUR mode, press the “MENU” button up to visualize “ADR”. Through the “UP” and
“DOWN” keys select “COL”. Press “ENTER” to confirm.
Through the “UP” and “DOWN” keys select “ACT”. Through the “UP” and “DOWN” keys select “ON” or “OFF” to
activate or deactivate the FIXED COLOUR mode. Press “ENTER” to confirm.
Now, through the “UP” and “DOWN” keys, it is possible scroll the colours.
1. Red
RED
2. Green
GRE
3. Blue
BLU
4. White
UHT
Once positioned onto the desired colour, press “ENTER” to confirm. By the keys “UP”and “DOWN” select “ON” or
“OFF”. It is possible to activate or disactivate the colours. Press ENTER to confirm.
Now the unit is in FIXED COLOURS mode and the diplay will keep reading “COL”.
To exit from the FIXED COLOURS mode, press the “MENU” button, select “ACT” and press “ENTER” to confirm.
Select “OFF” to deactivate the FIXED COLOURS mode. Press ENTER to confirm.
8.2 Dynamic white MASTER configuration
The FIXED COLOURS mode ONLY works when 3 channels DMX mode is set.
To activate the FIXED COLOUR mode, press the “MENU” button up to visualize “ADR”. Through the “UP” and
“DOWN” keys select “COL”. Press “ENTER” to confirm.
Through the “UP” and “DOWN” keys select “ACT”. Through the “UP” and “DOWN” keys select “ON” or “OFF” to
activate or deactivate the FIXED COLOUR mode. Press “ENTER” to confirm.
Now, through the “UP” and “DOWN” keys, it is possible scroll the colours.
1. Cold white
CW
2. Warm white
WW
Once positioned onto the desired colour, press “ENTER” to confirm. By the keys “UP”and “DOWN” select “ON” or
“OFF”. It is possible to activate or disactivate the colours. Press ENTER to confirm.
Now the unit is in FIXED COLOURS mode and the diplay will keep reading “COL”.
To exit from the FIXED COLOURS mode, press the “MENU” button, select “ACT” and press “ENTER” to confirm.
Select “OFF” to deactivate the FIXED COLOURS mode. Press ENTER to confirm.
8.3 SLAVE configuration
To set up the unit as SLAVE set the 5 channels (RGBW) or 3 channels (DW) DMX mode with address 001.
Program N° Effect
1
Red - Magenta - Yellow
2
Red - Magenta - Yellow - White
3
Green - Cyan - Yellow
4
Green - Cyan - Yellow - White
5
Blue - Cyan - Magenta
6
Blue - Cyan - Magenta - White
7
Green - Cyan - Blue - Magenta - Red - Yellow
8
Green - Cyan - Blue - Magenta - Red - Yellow - White
8.0 FIXED COLOURS mode (only RGBW and DW)
English
33
