3.5 4-leaf barndoor set up
Mounting the 4-leaf barndoor has been designed to be easier then the previous version. There is a
new lid that allows a fast access to the barndoor set, the protection grid and the eventual expansion
filter.
Please follow the instructions below:
- Remove the screw that fastens the lid (pict.1)
- Raise the lid (pict.2) and place in the barndoor set in the external slot;
- close the lid and secure it with the screw you previously removed;
The protection grid (pict.3) is positioned in the slot close to the glass while the eventual expansion
filter has to be placed in the middle position between the barndoor set and the grid.
3.6 Electrical connection
1) Cable the mains plug with a supply cable 3x2.5 mm
2
minimum with a 2-poles (x10A+T) plug;
2) Connect the lantern to a mains supply of 230V - 50/60Hz.
3) Ensure that the mains cable is connected to earth;
the safety thermoswitch must have the following characteristics:
rated for (In) 16A - sensitivity (Id) 0,03 A.
4) KOLORADO
®
MK2 1800 is provided with power factor correction system.
13
pict.1
pict.2
pict.3
