16
6.0 AUTOMATIC MODE
KOLORADO® MK4 2500
has to be set to
MASTER ON
to access it in automatic mode:
push SELECT, when
1.OF
is displayed push (+) or (-) to obtain
1.ON
. Now press ENTER.
The unit is set to
MASTER ON
. The unit starts working in automatic mode and is ready
for the programming procedure.
Push SELECT and the following will be displayed: (P.=01)
Select the desired programme by pushing keys (+) and (-);
8 programmes are available as per table 1.
If instead one single colour is desired to be selected, by pushing
the key (+) after programme 8, or by pushing the key (-) before
programme 1, the display will show respectively (C.01) or (C.60).
Push keys (+) and (-) to select one of the 60 colours available.
To confirm the choice, push (SELECT) until 1.ON is visualized.
Colour changing speed can be determined by pushing SELECT; the display will
show: (SP.1)
Push (+) and (-) to set the speed;
Colour scene and positioning length are described in diagram 2.
Colour scene length can be customised by pushing SELECT and the display will
show: (PA.0)
Act on (+) or (-) to set the colour scene length. Pre-set colour scene
length can be checked in diagram 3.
To see the automatic colour scenes sequence while it is automatically revolving
push ENTER repeatedly.
Push SELECT, then (+) or (-), as above mentioned, to select a new programme.
www.carlosmendoza.com.mx
