15
The connection of the XLR 3 poles must be as follows:
pin 1 = function GND (SHIELD)
pin 2 = function SIGNAL -
pin 3 = function
Please ensure that the cables are properly connected.
Use shielded cable.
In order to protect the PCB housing from water penetration, it is strictly recommen-
ded to position the DMX connecting plugs as illustrated below.
5.2 Channels Indication
KOLORADO MK4 2500
Warning:
a prolonged use of the electronic strobe effect will considerably redu-
ce the lamp life. It is strongly advisable not to use the electronic strobe effect lon-
ger than 10 minutes also to prevent the activation of the thermal protection
(de-activation of the electronic strobe effect, 100% lamp on).
www.carlosmendoza.com.mx
