Griven GOBOCLIP, Руководство пользователя

Страница: 15 / 20

Ø53,3 mm can be put in front of the metal gobo if you want to provide your image with colour.
Lay the metal ring back into its original position once the gobo and the filter have been set in the
slot.
4.2 Optic group adjustment
The optic group of this unit consists of two separate lenses and one objective with four lenses.
Adjust the focus and customise the zoom only when a gobo pattern is in its holder.
Power up the unit and direct the light output to the surface where you want to project the image.
Do not look towards the lamp directly during this process so to avoid any possible damage to your
eyesight. Three lenses and one diaphragm are available to adjust the angle aperture and the dimen-
sion of the image you want to project.
Do not use the first lens (the closest one to the gobo) and you will obtain an angle aperture going
from 19 to 24 degrees depending on the position of the other lenses on the cylindrical pivot (see
picture 17).
Using all lenses plus the diaphragm you will obtain an angle aperture going from 24 to 30 degrees
depending on their position on the cylindrical pivot (see picture 18).
15
Pict.16
Pict.17
Pict.18
Zoom 19° - 24°
Zoom 24° - 30°
Second lens out
Second lens in