Griven GOBOCLIP, Руководство пользователя

Страница: 14 / 20

4.0 USING THE PROJECTOR
4.1 Installing the gobo pattern
Open the front panel of the unit to access the gobo pattern and optic group housing.
Follow the instructions below to install the gobo pattern:
- Remove the two screws (A) shown in picture 12;
- Open the panel, lift it and use the metal support (B) to keep it up (see picture 13). The metal
support (B) is also depicted in its retracted position in picture 14.
To access the gobo slot holder, rotate the lenses and the diaphragm by loosening the relevant fixing
knobs (see pictures 14 and 15).
The gobo slot is provided with a flexible metal ring to hold it in position. Remove the ring with a
screw driver and set the gobo in its housing (see picture 16).
Either glass or metal gobos can be used but they must comply with the dimensions of a standard
“D” size gobo pattern which is Ø53,3 mm. Maximum image size is Ø40 mm. A dichroic filter
14
A
B
B
Pict.12
Pict.13
Pict.15
Pict.14