Griven AL2320, Инструкция по эксплуатации

Страница: 25 / 36

B. Remove the upper closing flange “5” .
C. Rotate the led group towards the desired direction.
D. Close the unit again.
6.3 Connection to mains power
The unit can operate with voltage 100-240Vac and with frequency of 50 and 60Hz.
A. Remove the screws “4” .
Warning!
Make sure that the formwork is positioned in a way that allows the inclination of the LED plate
in the desired direction.
Make sure that the front panel gasket is properly positioned in order to avoid water infiltrations into the unit.
±10°
5
Warning!
• Before connecting the unit, verify that power supplies features are compatible with the unit features.
• The unit must never be installed if not grounded electrically.
• It is suggested to use a magnetothermic switch along the power supply line, as prescribed by in force rules.
• The unit must not be powered up through a dimmer power device.
• Wiring and connection actions are to be performed by a qualified staff.
4
English 25