Griven AL2320, Инструкция по эксплуатации

Страница: 31 / 36

Dune MK2 can operate without DMX signal (in AUTOMATIC mode) and can be set so that a single MASTER unit
will command a series of SLAVE units. This function is particularly useful when more units are desired to execute the
same programme in synchrony.
The following picture shows an example of a Master-Slave layout.
8.1 MASTER configuration
To execute the preset colour-changer programme set the dip-switch Master to ON.
If the unit is properly set up as Master, the red led next to the dip-switch panel will flash.
The following pictures show some examples of MASTER units configuration.
8.0 Master-Slave and Automatic function
MASTER SLAVE 1 SLAVE N
IN OUT IN OUT
SLAVE 2
IN OUT
Terminal resistor
(R=120
Ω
not included!)
Unit set as Master (Master = ON)
1 2 3 4 5 6 7 8 9 10 11 12
1 2 4 8 16 32 64 12
8
25
6
M
as
te
r
D
M
X
m
od
e
Warning!
If MASTER-SLAVE mode is being used, no other DMX control device must be present along the line!!
English 31