Griven Professional DARDO 2500 HMI, Инструкция по эксплуатации

Страница: 7 / 12

English
7
1.0 PACKING
Check carefully the content of the box and in case of damage contact immedia-
tely your forwarder.
The following items are included in the boxes:
Box 1
n° 1 instructions leaflet
n° 1 followspot DARDO 2500 HMI
Box 2
n° 1 Ballast
2.0 SAFETY
Even if this lantern is fitted with a safety micro-switch which automatically discon-
nect power as soon as the lamp cover is opened, we strongly suggest to disconnect
the lantern from mains supply before replacing the lamp.
• This followspot has been designed for use in interior. For safety operation, max.
ambient temperature must not exceed 50°C.
• Caution: the surface temperature of the followspot can reach 100°C
• Caution: hot lamp; ensure that the lamp is cold before attempting to remove it
(about 10 minutes)
• This followspot is fitted with safety thermo switch and power factor corrector.
3.0 INSTALLATION
3.1 Fitting lamp
1- Turn the captive screw located on the rear part of the followspot, near the fixing
bracket, to access the lamp tray, then turn the second screw and gently pull
down the lamp tray. As soon as the lamp tray is released, the safety switch will
automatically disconnect both poles of the mains supply to the lamp.
2- Clean the lamp with the cleaning towel and fit it carefully in the lamp holder.
- avoid to touch the lamp with fingers or dirty towels;
- do not shake the lamp;
3- Fix the lamp to the lamp holder tightening the fixing knobs;
4- Close the lamp tray and the access cover
3.2 Mounting position
The followspot DARDO 2500 HMI can be mounted on a tripod stand; distance from
flammable object must be minimum 2 m.
The ballast mast be placed in horizontal position.
3.3 Mounting on tripod
Mount the followspot DARDO 2500 HMI on the tripod, tightening the stirrup by the
locking knob.
The stirrup is designed to give a smooth and positive up/down movement.