GRIT Freedom Chair Скачать руководство пользователя страница 35 | Manualshive

Страница: 35 / 50

GRIT Freedom Chair Скачать руководство пользователя страница 35

35

Another way to think about it is that the top of the lever is like first gear on a car, and the bottom of the lever is like

fifth gear.

(a)

“Shift gears” by shifting your hand position

on the levers. Slide your hands to match the
riding conditions.

(b)

Grabbing the top of the levers is like first

gear and is good for hills and mud. Use many
small, alternating lever strokes to climb hills.

(c)

Grabbing the bottom of the levers is like

fifth gear and is good for smooth ground. Push
through long strokes to move quickly.

Figure 3.7: Changing hand position on the levers.

3.3

Braking

Pull backward on the levers to apply the brakes. The brakes work when the brake tube on the lever comes into contact with the
tire.

The brakes work by coming into contact with the tire. It is normal for this to wear out the powder coat on the brake

tube. It will not wear down the tires—in fact, the levers will wear down first! While worn-off powder coat isn’t a problem, please
contact GRIT if you wear away a hole in the lever itself.

For added braking force,

pull backward on the levers from the top of the lever

. This provides more braking leverage

and much better brake performance. You can also “hug” the levers by putting them in the crooks of your arms and pulling
them toward your body.

WARNING:

WET CONDITIONS DECREASE BRAKING PERFORMANCE. Use caution when riding in wet conditions. Wet

tires require more braking force for stopping. Riding in wet conditions without the ability to apply the braking force
required for stopping could result in a loss of control, which could result in a collision or a fall.

«
...
33
34
35
36
37
...
»

Содержание Freedom Chair



















































Отзывы:

Нет отзывов