GRIT Freedom Chair Скачать руководство пользователя страница 15 | Manualshive

Страница: 15 / 50

GRIT Freedom Chair Скачать руководство пользователя страница 15

15

WARNING:

ALWAYS ENSURE THAT THE AXLE BUTTON IS POPPED OUT AND THE COUPLING REACHES THE FREEWHEEL.

Riding the Freedom Chair without the wheels fully attached could cause a wheel to fall off the chair, causing a crash and fall and

may result in serious injury or death.

If the button is in and the coupling does not reach the freewheel the chair is not safe to ride.

A correctly attached wheel has the button out and the coupling reaching the freewheel. Note that the spacing will be slightly different between the coupling and
the freewheel on the right and left sides of the chair. If unsure about the connection, try pulling the wheel off to check whether it is correctly locked in place.

2.2.3

Attaching the seatback

The seatback slides into the seat and attaches with push-button clips.

Slowly attach the seatback

to prevent it from jamming.

Insert the seat into both sockets simultaneously and keep the seatback level during insertion.

«
...
13
14
15
16
17
...
»

Содержание Freedom Chair



















































Отзывы:

Нет отзывов