Model 7300 Power Pinner CD Hand Welder
4
FIRE
During welding, small particles of hot metal can be expelled. Ensure that no combustible mate-
rials are near the welding area.
MAINTENANCE
All cables must be inspected regularly to ensure that no danger exists from worn or damaged
insulation or unsafe electrical connections. Take special note to the cables near the gun – this is
where maximum wear occurs.
Worn cables not only produce inconsistent welds, but can overheat or spark.
TRAINING
Use of this equipment must be limited to authorize personnel only. They must be adequately
trained, and have read and understood everything in this manual. The manual must be available
to operators at all times.
INSTALLATION
Select a site for the equipment which is capable of supporting the weight of the equipment,
which is clear from traffic routes where people may trip over cables, or they may be damaged
by other equipment or vehicles.
Do not hang connecting cables over sharp edges or have near heat sources.
