background image

Pneumatic nailers, staplers & compressors marketed under the

GRIP-RITE

 brand are warranted to be free from defects in

workmanship & materials (except rubber o-rings, bumpers, seals,
driver blades, dipsticks, & air filters) for a period of 3 years for tools
and one year for compressors from the date of original purchase.

This warranty will not apply when:

The original receipt (or copy of the original receipt), showing the

   original purchase date, is not provided with tools/compressors sent
   in for warranty repair

The tool/compressor has been misused, abused or improperly

   maintained

Alterations have been made to the original tool/compressor
Repairs have been attempted/made to the original tool/

   compressor by any entity other than a proprietary
   

PRIMESOURCE® 

service/warranty center or authorized

   service/warranty center

Non- 

GRIP-RITE TOOLS

 

/ GRIP-RITE COMPRESSORS

parts have been used

The tool has suffered any physical damage due to the use of

   non-PRIMESOURCE® approved fasteners*

Repairs are required due to normal wear & tear
The tool/compressor has been inadequately packaged leading to

   damage in-transit to the service/warranty center

   *Approved fasteners include the following brands 

GRIP-RITE

   FAS'NERS

FAS'NERS UNLIMITED

IN NO EVENT SHALL 

PRIMESOURCE®

 BE LIABLE FOR ANY

INDIRECT, ACCIDENTAL OR CONSEQUENTAL DAMAGE FROM
THE SALE OR USE OF THESE PRODUCTS.  THIS DISCLAIMER
APPLIES BOTH DURING & AFTER THE TERM OF WARRANTY.

THIS IS OUR WARRANTY & IS EXPRESSLY IN LIEU OF ALL
OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE
WARRANTIES OF MERCHANTABILTY AND FITNESS FOR A
PARTICULAR PURPOSE (EXCEPT AS MAY BE OTHERWISE
PROVIDED BY LAW).

This limited warranty gives you specific legal rights, and you may
also have other rights, which vary, from state to state.

®

•  

•  

•  
•  

•  

   

•  

•  
•  

PNEUMATIC TOOL/COMPRESSOR WARRANTY

30

WARRANTY

Содержание GRTFC83

































Отзывы: