GRIP Base Connector SHW
Assembly and Operating Manual
10 EC - Declaration of incorporation
according to the Machinery Directive 2006/42/EC, annex II B
The producer / distributor
GRIP GmbH Handhabungstechnik
Alter Hellweg 70
D-44379 Dortmund, Germany
hereby declares that the following products
Product designation:
Base Connector SHW
Functional description:
Systems for the manual exchange of entire robotic arms
Type designation:
Base Connector SHW160
EN ISO 12100-1:2003
EN ISO 12100-2:2003
Authorized representative: Dipl.-Ing. (FH) Hasan Canti
Location:
Dortmund
Date:
Dipl.-Ing. (FH) Hasan Canti
Executive Director
Rev. 1.01
7
He further states that the specific technical documentation has been drawn up in accordance with
annex VII, Part B.
The following harmonized standard has been applied:
Safety of Machinery- Basic concepts, general
principles for design- Part 2:
Technical principles (ISO 12100-2:2003)
Safety of Machinery- Basic concepts, general
principles for design- Part 1:
Basic terminology and methodology (ISO 12100-1:2003)
In the case of reasoned requests, the specific documents shall be sent to the national authorities
as follows: Post
The product mentioned above may only be put into operation if it has been established applicable
that the unit, into which the above-mentioned product is to be incorporated, complies with the
provisions of the Machinery Directive 2006/42 / EC.
The provisions of the above-mentioned directives -including their effective amendments- comply
with the time of the declaration.
He further states that the following essential requirements of the Machinery Directive 2006/42/EC
were applied and observed:
annex I, numerics: 1.1.2; 1.1.3; 1.1.5; 1.3.2; 1.7.4
23.02.2021
