G-SWA
Assembly and Operating Manual
7 Maintenance and care
7.1 Disassembly of the SWA
(Behold Image 4)
1.
Disassemble the SWA.
2.
Loosen the Setscrew (pos. 6).
3.
Rotate the axis (pos.2) counter-clockwise until the flanges (pos.3) are released.
4.
Loosen the Setscrew (pos. 5).
5.
Remove the axis (pos. 2) from the upper assembly (pos. 1).
6.
Clean all parts thoroughly. Inspect for wear and defects.
7.
Lubricate all mating surfaces.
For assembly, reverse the order.
7.2 Torque specifications
M6 – 8,5 Nm; M8 – 20,6 Nm; M10 – 41 Nm; M12 – 71 Nm
8 Parts list
8.1 Spare and wear parts, depending on size
5
Quantity
Description
Upper assembly
Axis
Flange
Screw nut
4
5
2
Axis
Setscrew
1
1
2
2
1
Order-No.
EG-SWA…-A
Locking ring
Lower assembly
7
7
Index pin
1
Pos. Description
2
3
Pos.
1
1
1
The SWA is virtually maintenance-free. Check the semi-cylindrical bolt in regular intervals for correct
function. Keep the mating surface and the moving parts clean and lubricate them slightly.
Spare parts and component parts of the SWA can be found on our homepage:
www.grip-gmbh.com
6
