Grindmaster GPOD001, Руководство оператора, Страница: 9 / 16

Page 7
Brewing Instructions
Step 1:
After the unit has been prepared for use (refer to page 6 for instructions), the water
reservoir will be low (the BREW button may be flashing aqua indicating low water
level). Refill the water reservoir to the MAX indicator line. The brewer will begin to heat
the water and the BREW button will slowly pulse red.
Step 2:
When the water is hot, the BREW button will turn solid yellow.
Step 3:
Open the brew chamber door and insert a coffee pod into the brew basket.
Step 4:
Latch the brew chamber door and place a cup that holds at least 10 ounces (296 ml)
on the cup grate, under the spout.
Step 5:
Select brew strength (Mild (O), Med (O) or Strong (O)) or Tea.
Step 6:
Press and release the green BREW button to begin brewing. (You must press and
release the BREW button within 60 seconds of latching the brew chamber door to
begin the brew cycle.)
Step 7:
Once brew is complete (no more coffee or tea is being dispensed; pump stops), open
the brew chamber to release the last bit of coffee or tea into your cup.
NOTE: If the BREW button turns yellow, before dispensing, check to be sure the
brew chamber door is closed. If the door is already closed, open and close the
brew chamber door to reset the brewer. This will cause the BREW button to turn
green, indicating the brewer is ready to brew. Press and release the green BREW
button to begin brewing.