Grindmaster GPOD001 Скачать руководство пользователя страница 11 | Manualshive

Страница: 11 / 16

Grindmaster GPOD001 Скачать руководство пользователя страница 11

Page 9

Brewer Features

(continued)

BREW Button:

Green Light Indicator

Off - Power is not applied to the machine.
Steady Green - Water is at operating temperature and ready to brew.

Aqua Light Indicator

Steady Aqua - BREW button has been held down for more than 5 seconds and pump
is priming the hot water tank.
Slow, Flashing Aqua - Reservoir water level is below REFILL line on reservoir or
reservoir is not in place. Unit will not heat.

Red Light Indicator

Slow, Flashing Red - Water is heating up to brew temperature. Dispensing is not
permitted.
Rapid, Flashing Red - Overtemperature condition. Dispensing and heating are not
permitted. User must unplug the brewer and wait for at least 15 minutes before
plugging back in. If the unit continues to rapidly flash red after plugging it back in,
unplug the unit and contact the manufacturer’s Customer Service Department.

Purple Light Indicator

Slow Flashing Purple - Brewer must be AutoPrimed & Flushed to enable brewing
operation (see step 4 on page 6).

Yellow Light Indicator

Constant Yellow - Brew chamber door has been opened during brewing and brewer
status is identified as “not ready”. Light will turn green and brewing will resume when
door is closed and BREW button is pressed.

- OR -

The brew lockout feature is ON and the unit has set idle for more than one minute after
the brew temperature was reached. Light will turn green after the brew chamber door
is opened and closed.

Temperature Setting

The brewer is shipped with the hot water temperature set to the ideal
brewing temperature of 197°F (92°C).

Temperature Limiting Thermostat:

The unit has a temperature limiting safety device on its hot water tank. It shuts off all
power to the unit in case of excessive heating due to unexpected component failure.
The brewer cannot be restarted. Contact the manufacturer’s Customer Service
Department.

Brew Interruptions:

The brew cycle can be interrupted during dispensing in two distinct ways:
1)

2)

Pushing the brew button during dispensing. User must open and close
the brew chamber door (replacing the pod if desired) to resume normal
brew sequence.
Pushing the ON/OFF button, shutting off the unit. Normal operation resumes after
restarting.

«
...
9
10
11
12
13
...
»

Содержание GPOD001

















Отзывы:

Нет отзывов