Grinders FLINDERS, Инструкция по эксплуатации

Страница: 7 / 15

10 11
On
DISPENSING MILK BASED DRINKS
Return Milk Jug
to its position on
the machine and
ensure the Milk
Jug Lever is in
the Dispensing
Position .
The Milk buttons
will flash while
the machine
warms up (about
1 min).
Raise the Lever to
open the
Capsule
Compartment .
Insert the capsule,
pressing it gently
into place.
When all the
buttons are
steadily lit the
machine is ready.
Switch the
machine
ON
using
the On/Off button .
All the button
lights will flash
until machine is
warmed up.
Close the Lever
fully and place
a cup or mug
under the Coffee
Dispensing Spout .
Remove Milk Jug
and fill with fresh
milk.
1.
3.
7.
2.
4.
8.
5. 6.
Continued on next page
If you would like to
top up with extra
milk press the
Milk Only button .
You can now
choose to top up
with another shot
of espresso by
pressing the
Single
Espresso button .
Dispensing
stops when the
programmed
amount is reached
or press the
button to stop
the dispensing in
advance.
Dispensing
stops when the
programmed
amount is reached,
or press the
button to stop
the dispensing in
advance.
Please note: To ensure freshness of the milk, the Milk Jug should be removed and stored
in the refrigerator between uses. Please ensure a ‘Milk Jug Rinsing Cycle’ on Page 15 is
completed before removing and storing in refrigerator. We recommend to store the milk in
the refrigerator 2 days maximum.
DISPENSING MILK BASED DRINKS -
Continued
11.
13.
12.
14.
Press and release
the Cappuccino,
Latte or Milk Only
button depending
on the desired
beverage. The
selected button will
flash.
The machine
will dispense
the coffee first,
followed by the
milk.
9. 10.