8
9
FIRST TIME USE - Continued
Remove
Milk Jug
from the machine,
fill with water
and return to it’s
position on the
machine; the
Milk
buttons
will flash.
To prepare milk
based drinks,
make sure the
Milk Jug Lever
is
in the
Dispensing
Position
.
When Milk buttons
remain steadily lit,
rinse by pressing
the
Milk Only
button
. Press again
to repeat rinse
cycle.
Remove
Milk Jug
from machine and
empty remaining
water from jug.
Water
Fill
Milk Jug
with
fresh milk and
return to its position
on the machine.
The machine is now
ready for use with
milk based drinks.
Milk
9.
11.
8.
10.
12.
Please note:
For dispensing beverages without milk, you can use the
Single
or
Double Espresso buttons
or
Hot Water button
without the
Milk Jug
in position. The
Milk buttons
will not be lit however the
remaining buttons will be lit and able to dispense beverages.
WARNING!!!
Do not use the
Hot
Water button
(lit in
blue) for dispensing
coffee. Doing so will
damage the machine
and void your
warranty.
Raise the
Lever
to eject the used
capsule into the
Used
Capsule
Drawer
.
Dispensing
stops when the
programmed
amount is
reached, or press
the button to stop
the dispensing in
advance.
Close the
Lever
.
TIP:
Between uses,
to ensure optimum
product delivery,
remove used capsule
from machine and rinse
by pressing the
Double
Espresso button
.
Raise the
Lever
to
open the
Capsule
Compartment
.
Insert the capsule,
pressing it gently
into place.
When all the
buttons are
steadily lit the
machine is ready.
Switch the
machine
ON
using
the
On/Off button
.
All the button
lights will flash
until machine is
warmed up.
Close the
Lever
fully and place
a cup or mug
under the
Coffee
Dispensing Spout
.
Press and release
the
Single Espress
o
or
Double Espresso
button
, depending
on the desired
coffee. The selected
button will flash.
On
DISPENSING COFFEE
1.
3.
7.
2.
4.
8.
5.
9.
6.
10.
