Grin Technologies Frankenrunner, Руководство пользователя

Страница: 9 / 27

Frankenrunner User Manual
Rev 1.0
This minimal approach with a PAS sensor does not provide for any means to
adjust the assist level outside of reprogramming the controller, and for that
reason has limited usefulness. A display unit with up/down buttons is required in
order to vary the amount of assist while riding.
4 Controller Mounting
For optimal performance, the Frankenrunner should be installed such that the
finned heatsink is exposed to airflow to keep the controller cool. This placement
will noticeably improve the maximum power at thermal rollback compared to a
controller that is in still air.
The controller casing includes two
threaded M5 holes 60mm apart on
the narrow edge to facilitate
installation. Grin offers a tube
mounting bracket that
converts this into a channel
that securely attaches to
bicycle tubing with either zip ties or hose
clamps.
5 Parameter Tuning
If you purchased the Frankenrunner as part of a complete conversion kit that
includes a battery, a motor, and so on, the controller should be pre-configured
and no tuning of the parameters should be necessary. This section can be
skipped entirely.
If you bought the Frankenrunner separately, or are changing your set-up, you
should configure the controller to your motor and battery pack once it is installed
and connected on your bike. You will need a computer, a TTL-USB programming
-7-