Grillo PX31, Руководство оператора

Страница: 11 / 59

PX31-32/ Translation of the original instructions
MAINTENANCE SUMMARY TABLE
PROCEDURE EVERY 8
HOURS
AFTER
20
HOURS
EVERY
50
HOURS
EVERY
100
HOURS
ONCE A
YEAR OR
EVERY
200
HOURS
Engine oil
check the level ●
change ● ●
Air filter
check ●
replace ٭
Gearbox oil
Check the level ●
replace ●
Check that the engine intake grid is
clean
●
Check that tines are well-sharpened
and well-fixed
● ●
Lubricate with grease
●
● recommended procedure
٭
procedure to be carried out if necessary
LONG PERIODS OF STORAGE
If the machine is to be out of use for more than 30 days, drain the fuel from the engine to prevent
sticky deposits from forming in the fuel intake system or in vital parts of carburettor. To avoid this
procedure, it is possible to save fuel in storage up to 12 months by using an appropriate fuel
stabilizer. Add the such additive to the fuel in the tank or in the fuel container. Run the engine for a
while to let the stabilizer get into the fuel system.
Caution: if the engine is fed with petrol
containing alcohol, drain the fuel tank and run the engine until there is no fuel left.
TRANSPORTING THE MACHINE
If the Rotavator has to be transported on a lorry or a trailer, fasten it to the vehicle using ropes or
cables.
IMPLEMENTS
TILLER ADJUSTMENT KIT
The rotary tiller can be extended from 570 up to 740 by adding one tine-holder for each side or the
tiller can be reduced up to 300 mm by mounting just one tine-holder each side (fig.8). It is
necessary to mount the two mudguards over the tiller.
FURROWER
The furrower (fig. 9) has been developed to perform both seed and irrigation furrows. It has to be
fitted at the place of the spur and it works together with the rotary tiller.
8