25
Shielding lid
The shielding lid is both a decorative and a protective element; it consists of two parts. It
is necessary to unscrew the four screws with a hex key (included) in order to remove both
parts of the lid.
Fill funnel
The shielding lid needs to be removed in order to access to the funnels. There are two
square holes for the installation of funnels in the upper part of the heater.
Stone heater lid
Lamellae covering the stone heater (2-3 pieces) in front of the lid need to be removed in
order to access the lid.
The lid position is adjusted via two mounting screws with pockets for the hex key (included).
To load the stones, take off the lid by removing the screws. For heater operation in fine
steam mode the lid shall be tight against wall of the stone heater with no gap.
The lid shall be removed, if you need access to the stones or during the operation of the
inner compartment of the stone heater in traditional steam mode.
х4
х4
