Grill'D Aurora 180 Long Скачать руководство пользователя страница 14

14

Note: 

For information on the water tank maintenance, refer to the Operation 

Manual for the water tank.

IMPORTANT! Carry out maintenance works on the heater and chimney only 

after their complete cooldown.

The heater and chimney shall be cleaned of soot before the commencement 

of the heating season, as well as during the entire heating season at least 

once every three months.
Cleaning of the heater and chimney to be performed mechanically using 

special devices, tools and machines (brush, cleaner, scraper, sinker, vacuum 

cleaner, etc.). The selection of the necessary devices is performed based on 

the cleaning work needs.

IMPORTANT!  The  use  of  cleaning  log

s

  (briquettes),  homemade 

compounds creating high temperature in the heater firebox and chimney, 

is prohibited for the purposes of burning the soot deposited in them.

If there is a thermal glass door, use soft cleaning waste with special agents 

for cleaning heat-resistant glass of fireplaces and heaters from soot in 

accordance with the application instructions.

IMPORTANT! Take measures recommended for safety when cleaning the heater 

and chimney, use personal protective equipment required for such works.

12. LABELING AND PACKAGING

Labeling

There is an information plate on the heater. It contains the trademark 

designation, model, month and year of manufacture of the heater, its serial 

number.

Packaging

The heaters are delivered ready-assembled on pallets, 2 pieces on one pallet, 

each pre-packaged in film and in a container.

13. TRANSPORTATION AND STORAGE

IMPORTANT! Prior to the first stoking of the heater do not give mechanical 

impact to the heater surface prior to complete heat-bodying of the paint and 

its cooldown in order to avoid damage of the coat of heat-resistant paint.

The following storage conditions apply to the storage premises of both the 

Supplier and the Consumer.

Storage conditions:

 In accordance with GOST 15150-69, group 3. (in a dry 

room, providing protection from atmospheric precipitation and direct sunlight), 

in the original packaging, in a vertical position.

Temperature conditions:

 from - 60 to + 40 ⁰С with relative air humidity not 

more than 80% (at +25 ⁰С).

Содержание Aurora 180 Long

















Отзывы: