background image

 

LineIQ Battery Charger 

28 Aug 2012 Edition 1.0 Page 2 of 13 

Document No. : GSN-DC-103 

LineIQ Battery Charger User Manual 

 

© CHK GridSense Pty Ltd 2012 

 

The material presented in this manual is copyright protected by CHK GridSense Pty Ltd 
2012. Any reproduction in whole or part for any purpose without the prior written consent of 
CHK GridSense Pty Ltd is strictly prohibited. Information in this document is subject to 
change without notice. 

All trademarks are property of their respective owners. 

 

Printed in Australia 

 

 

 

AUSTRALIA / NEW ZEALAND EMC NOTES

 

 

N3207 

 

This is a CISPR 22 Class A product. In a domestic 
environment this product may cause radio 
interference, which the user may need to take steps to 
prevent. 

 

LIMITED WARRANTY 

The  LineIQ  Battery  Charger  is  guaranteed  to  be  free  of  mechanical  and  electrical  defects 
when dispatched from our store. Provided that the LineIQ Battery Charger has been operated 
within its normal ratings as specified, it will be repaired or replaced free of charge if, within a 
period  of twelve  (12)  months from  date  of  our  invoice  to  the  original  purchase,  it  is  proven, 
upon  examination  by  our  engineers,  to  be  defective  in  material  or  workmanship.  This 
warranty  is  void  if  the  unit  has  been  tampered  with,  abused  or  if  the  defect  is  related  to 
service not performed by CHK GridSense Pty Ltd. 

Responsibility of CHK GridSense Pty Ltd: 

Under this guarantee, the responsibility of CHK 

GridSense  Pty  Ltd  is  limited  to  the  repairing  or  replacing  of  any  defective  part  provided the 
instrument is returned freight paid to and from our Testing and Service office in Sydney, NSW 
Australia. 

Содержание LineIQ














Отзывы: