GRG Banking DT-7000K20-501 Скачать руководство пользователя страница 50

Страница: 50 / 71

DT-7000K20-501 ATM User

Manual

Confidential material of GRG, No disclosure to unauthorized Party

2. How to open and close the safe door with electronic

combination lock

2.1. The types of electronic combination lock

The type of the combination lock installed depends on the machine configuration. The machine

configured with UL Safe may use the following electronic combination lock.



Lagard(LG) electronic combination lock



NLLock electronic combination lock

2.2. How to operate the safe door with LG electronic combination lock

The LG electronic combination lock allows you to set authorized users, including manager and
common user (Refer as “user” in the following). The manager can add, delete the user, or disable

and restore the user's password. Note that this lock only allows setting one manager (Factory

password is 123456) and one user.

Note:

The user has the authority of opening the lock and changing the password.

If you have entered wrong password four times continuously, you cannot continue any

operation within 5 minutes.

Repeated beeping and LED flashing indicates the battery is low.

Battery requirement: 9V alkaline battery

The combination lock will beep once with LED flashing once synchronically each time when

you press the digit key for the password.

Two continuous beeps synchronically with LED flashing twice indicate the password or the

operation is correct.

Three continuous beeps indicate the password or the operation is incorrect.

2.2.1. How to open the safe door

Содержание DT-7000K20-501








































































Результаты поиска

Содержание DT-7000K20-501

Отзывы:

Похожие инструкции для DT-7000K20-501

Бренды по названию

Популярные бренды

GRG Banking DT-7000K20-501, Руководство пользователя

Результаты поиска

Содержание DT-7000K20-501

Отзывы:

Похожие инструкции для DT-7000K20-501

Бренды по названию

Популярные бренды