DT-7000K20-501 ATM User
Manual
Confidential material of GRG, No disclosure to unauthorized Party
47
Note:
If you turn the lock backwards before
closing the safe door, you cannot close the
safe door. You should open the lock first
according to the introduction in Section
2.3.1 and then close the safe door.
Turn the lock backwards until it
clicks into place. The safe door will
be locked automatically.
2.4.3. How to change password
You can change the user password or the manager password as long as you know its original
password.
Note:
Always perform the operation with the safe door open.
The procedure of changing the password:
(1)
Press and hold key 0 until you heard two continuous beeps. The light remains on during
the following actions.
(2)
Enter the original six-digit password, such as 123456.
(3)
Enter the new six-digit password.
(4)
Enter the new six-digit password again to confirm it.
(5)
The password is changed successfully .
(6)
Test the new password several times before closing the door.
Note:
(1)
You will hear two continuous beeps when you complete the operation in each step.
(2)
In case of entry errors (long beep), the old password remains valid.
2.4.4. How to add a user
To continue the operation, you should know the manager password.
Note:
Always perform the operation with the safe door open.
(1)
Press and hold key 1 until you heard two continuous beeps. The light remains on during
the following action.
(2)
Correctly enter the six-digit manager's password (If the password is correct, you will
C
