background image

SKU 56072 

For technical questions, please call 1-800-444-3353. 

Page 5

SERIOUS PERSONAL INJURY, or 

DEATH.
Never place hands or feet between 

11. 

the log and splitter wedge, or 

between the log and the ram during 

the forward or reverse stroke.
Never place your hands or body near 

12. 

a hydraulic fluid leak. High-pressure 

fluid can be forced under the skin 

resulting in serious injury.
Never split a log that contains any 

13. 

foreign materials (nails, for example).
Do not use on logs longer than 25” or 

14. 

with a diameter greater than 12”.
Wear ANSI-approved safety goggles, 

15. 

NIOSH-approved dust mask/respira-

tor under a full face shield, heavy-du-

ty work gloves, steel-toe work boots 

and hearing protection during use.
Do not operate in explosive atmo-

16. 

spheres, such as in the presence of 

flammable liquids, gases, or dust.  

Gasoline-powered engines may ignite 

the dust or fumes.
Do not expose the Log Splitter to rain 

17. 

or wet conditions. Water entering the 

Log Splitter will increase the risk of 

electric shock.
Stay alert, watch what you are doing 

18. 

and use common sense when operat-

ing this piece of equipment.  Do not 

use this piece of equipment while 

tired or under the influence of drugs, 

alcohol or medication.
Do not overreach.  Keep proper foot-

19. 

ing and balance at all times.  This en-

ables better control of the equipment 

in unexpected situations.

Dress properly.  Do not wear loose 

20. 

clothing or jewelry.  Keep hair, cloth-

ing and gloves away from moving 

parts.  Loose clothes, jewelry or long 

hair can be caught in moving parts.
Parts, especially exhaust system 

21. 

components, get very hot during use.  

Stay clear of hot parts.
Do not cover the engine or equipment 

22. 

during operation.
Keep the equipment, engine, and sur-

23. 

rounding area clean at all times.
Use the equipment, accessories, etc., 

24. 

in accordance with these instructions 

and in the manner intended for the 

particular type of equipment, taking 

into account the working conditions 

and the work to be performed.  Use 

of the equipment for operations differ-

ent from those intended could result 

in a hazardous situation.
Do not operate the equipment with 

25. 

known leaks in the engine’s fuel sys-

tem.
This product contains or, when used, 

26. 

produces a chemical known to the 

State of California to cause cancer 

and birth defects or other reproduc-

tive harm.  (California Health & Safety 

Code § 25249.5, 

et seq.

)

When spills of fuel or oil occur, they 

27. 

must be cleaned up immediately.  

Dispose of fluids and cleaning materi

-

als as per any local, state, or federal 

codes and regulations.  Store oil rags 

in a bottom-ventilated, covered, metal 

container.
Keep hands and feet away from 

28. 

moving parts.  

do not reach over or 

across equipment while operating.

Содержание GREYHOUND 56072





















Отзывы: