18
Technical Data Sheet
Assembly and Operating Instructions
GU-SECURY Automatic with A-opener
(60)
5 Mounting instructions
5.1 General mounting advice
The electronic components should be installed with utmost care since chafed or defective ca-
bles, damaged contacts etc. may seriously affect the safety of the system and cause its failure.
Ensure that all components are in faultless state before mounting them.
It is imperative to observe the cutting specifications given in the
drawing below!
In case of any problems or questions please contact the distributor or manufacturer.
The appropriate installation of the drive requires general electrical and mechanical knowledge,
as is to be expected from a skilled and safety-conscious expert.
Attention:
It is imperative that a space of 60 mm should be provided above the
upper end of the A-opener allowing for the driving rod‘s travel.
If the recess is cut too small in length and depth, the lock’s functions will
be disturbed!
for SECUR
Y
Automatic with 2 latchbolts: 640 up to notched mark
for SECUR
Y
Automatic with 4 latchbolts: 489 up to notched mark
