TROUBLESHOOTING
PROBLEM
POSSIBLE CAUSES
SOLUTION
Status LED is blinking red
Low Battery
Recharge battery
Status LED is solid red during startup
Camera is not balanced well or not installed
Check camera balancing
IMU cable is loose
Check in software for IMU sensor error, re-seat IMU sensor connector
Tilt motor cable or encoder cable is loose
Check in software for Tilt error, re-seat tilt motor connector and encoder
connector
Roll motor cable or encoder cable is loose
Check in software for Roll error, re-seat roll motor connector and encoder
cable
Roll motor cable or encoder cable is loose
Check in software for Pan error, re-seat pan motor connector and encoder
cable
Status LED is solid red during operation
IMU sensor cable is loose
Re-seat IMU sensor connector
Status LED is solid white after start up
Exessive gyro drift
Re-calibrate
gStabi seems to be drifting
Gyro sensor is drifting too much
Re-calibrate gyro
gStabi has ossilation in one or more axes
Stiffness setting is too high
Reduce stiffness
Quick clamp/thumbscrew/top bar nut is not tightented
Check tightening. If necessary adjust the clamp tension with a hex wrench
Camera mounting is not stiff enough
Check camera mounting
Filters settings are incorrect: Gyro and output filter should only be changed
if other methods of reducing oscillation have failed
Please read more in manual about Gyro filter and output filter (Advaced
settings)
Motors seem to be weak
Stiffness is too low
Increase stiffness
Autopower adjustment is not enabled
Check in Expert menu if Autopower adjustment is enabled or not
Footage appears to wobble side to side or up
and down
Camera is not properly balanced
Check camera balance
Stiffness setting is low
Increase stiffness settings.
If you can identify which axis is poorly stabilized,
start with that axis’ Stiffness. Higher Stiffness will achieve
better stabilization. The tuning process is described in the
user manual.
30
Содержание H3
Страница 1: ...GREMSY H3 USER MANUAL Ver 1 6 ...
Страница 13: ...GETTING STARTED INSTALLING THE SOFTWARE APP Download at www gremsy com Support Software Manuals 10 ...
Страница 35: ...gremsy com ...