E32.0.05.6C-06
Manual for connection and operation of the GIR 2000 Pt
page 12 of 12
11. Specification
Absolute maximum ratings:
see chapter 3.2. (Connection data)
Measuring input:
Pt100, 3-wire
Measuring range:
-50.0 ... + 200.0°C
(or -58.0 ... +392.0 °F)
Resolution:
0.1°C or 0.1°F
Accuracy:
< 0.3% FS ±1digit
(at nominal temperature)
Temperature drift:
< 0.015% FS / K
Max. perm. line resistance
:
20 Ohm
Measuring freq.:
approx. 4 measures / sec.
Display:
approx. 13 mm height, 4-digit red LED-display
Operating:
4 push-buttons
Output:
1 volt-free Relay-output (standard)
or the corresponding designation on the label on the housing
Output type:
change-over contact, breaking capacity: 10A (ohmic load), 250 V
AC
Response Time:
< 0.5 sec.
Output-functions:
2-point-controller, min-/max-alarm
Switching points:
arbitrary
Power supply:
230 V
AC
, 50/60 Hz (standard)
or the corresponding designation on the label on the housing
Power consumption:
approx. 5 VA
Nominal temp.:
25°C
Operating ambient:
-20 to +50°C
Relative humidity:
0 to 80% RH (non condensing)
Storage temp.:
-30 to +70°C
Housing:
Dimensions:
48 x 96 mm (front-panel dimensions).
Installation depth:
approx. 115 mm (incl. screw-in/plug-in clamps)
Panel Mounting:
with brackets
Panel cut-out:
43.0
+0.5
x 90.5
+0.5
mm (H x W)
Connection:
via screw-in/plug-in clamps
Conductor cross-selection from 0.14 to 1.5 mm²
Protection class:
front IP54, with optional mounting seals IP65
EMC:
EA1 +A2 (appendix A, class B), additional errors: < 1% FS
When connecting long leads adequate measures against voltage surges have to be
taken.
12. Disposal notes
This device must not be disposed as „residual waste‟.
To dispose this device, please send it directly to us (adequately stamped). We will dispose it appropriately
and environmentally friendly.
