27
Modify auto settings
Current New
Mechanical watch
Target rate (coarse): Auto Auto b/h
Lift angle: 52 52 °
Measuring period: 4 4 s
Amplitude tolerance min.: 240 240 °
Amplitude tolerance max.: 320 320 °
Quartz watch
Signal source: Auto Auto
Measuring period: Auto Auto s
Vertical Zoom: 1 1 x
Battery voltage: 1.55 1.55 V
Pendulum clock
Target rate: Auto Auto b/h
Measuring period: Auto Auto s
Value
Value
Save
Back
Standard
values
Select
Select
To indicate the parameters, press the following buttons in the main menu:
button “Settings” then button “Modify auto settings” .
Changing automatic adjustments
Auto
mode
Auto,
MP06
only
Auto,
QM06
only
Auto,
Opto06
only
The parameters of Auto mode are always taken over if one of these buttons are pressed
(if you work in auto modus).
1. Button ( Select ) to select a line.
2. Button ( Value ) to change the value.
3. Button (Modify program name) to change name of program
4. Button ( Standard values) for factory settings .
Press button “Save” to store the values.
For changing parameters:
Press button to return into main menu
