GreenWorks 3647970, Руководство оператора

Страница: 11 / 31

PROBLEM POSSIBLE
CAUSE SOLUTION
The output pres-
sure varies high
and low.
The water supply
is not sufficient. Open water suppy
fully. Make sure
the garden hose is
free from block-
age.
The pump absorbs
air. 1. Make sure that
the hoses and
fittings have
no problem.
2. Turn the ma-
chine off.
3. Pull the gun
trigger until a
stable flow of
water comes
out through
the nozzle.
The water intake
filter is clogged. Remove the filter
and clean it in
warm water.
The supply volt-
age is low. Make sure that on-
ly the pressure
washer operates
on the circuit.
The gun, hose or
nozzle are calci-
fied. Operate distilled
vinegar through
detergent tank.
PROBLEM POSSIBLE
CAUSE SOLUTION
The motor buzzes,
but you can not
start the machine. The supply volt-
age is low. Make sure that on-
ly the pressure
washer operates
on the circuit.
The system has re-
maining pressure. 1. Stop the ma-
chine.
2. Pull the gun
trigger on
spray wand to
release pres-
sure
3. Start the ma-
chine.
The voltage de-
creases across ex-
tension cord. Disconnect the ex-
tension cord, and
connect the ma-
chine directly into
the outlet.
You do not use the
machine for a long
time. Speak to a person
of an approved
service center.
There is remaining
friction in compo-
nents. You can
hear a hum. 1. Disconnect the
water supply.
2. Turn the ma-
chine on for 2
or 3 seconds.
3. Repeat the
above step for
several times.
There is no water. The water supply
is off. Turn the water
supply on.
The garden hose is
blocked. Make sure that the
garden hose is free
from blockage.
8 TECHNICAL DATA
Universal Motor 120V~ 60 Hz, 13 Amps
Max. Pounds Per Square Inch
Pressure 2000 PSI
Max Gallon Per Minute 1.1 GPM
Maximum Inlet Water Temper-
ature 104 °F (40 °C)
Cleaning Units 2200 C.U.
Weight 30.6 lbs. (13.9 kg)
Double-insulated construc-
tion.
12
English
EN