GreenWorks 21142, Руководство пользователя

Страница: 12 / 43

12
ASSeMBly
OPERATIOn
W A R N I N G
Read and understand entire Operator’s Manual for each optional attachment used on this power
head and follow all warnings and instructions. Failure to follow all instructions may result in
electric shock, fire and/or serious personal injury.
W A R N I N G
Do not allow familiarity with product to make you careless. Remember that a careless fraction of
a second is sufficient to inflict serious injury.
W A R N I N G
Do not use any attachments or accessories not recommended by the manufacturer of this
product. The use of attachments or accessories not recommended can result in serious personal
injury.
W A R N I N G
Always wear eye protection with side shields marked to comply with ANSI Z87.1. Hearing and/
or head protection may also be required depending on the type of attachment used and as
prescribed in the attachment’s Operator’s Manual. Failure to do so could result in objects being
thrown into your eyes and other possible serious injuries.
CONNECTING TO POWER SUPPLY (See Figure 4 -5.)
The power head is designed with a cord retainer that prevents the extension cord from being
pulled loose while using.
• Form a loop with the end of the extension cord.
• Insert loop portion of extension cord through opening in the bottom of the rear handle and place
over cord retainer.
• Slowly pull loop against cord retainer until the slack is removed.
• Plug power head into extension cord.
• Unplug the power head.
• Press the front handle onto the power head shaft so that the handle is angled toward the rear
handle.
• Place the front handle along the power head shaft to a position that allows for comfortable
operation.
• Slide the bolt through the holes in the front handle.
• Slide the washer onto the bolt.
• Place the wing nut onto the bolt and tighten the wing nut securely.