11
ASSEMBLY
This electric power head may be used with only the following Greenworks, and Ryobi Expand-it
attachments.
GW 29402 Straight Shaft String Trimmer, 29017 Hedge Trimmer, 29027 Pole Saw,
29047 Tiller, 29057 brush Cutter, 29067 Blower
RY15518 Edger RY15520 Pruner RY15523 Straight Shaft String Trimmer RY15525 Curved
Shaft String Trimmer RY15550 Tiller RY15519 Blower
NOTE:
When using string trimmer attachments, use only .080 in. diameter line.
The attachment connects to the power head by means of a coupler device.
•
Unplug the power head.
•
Loosen the knob on the coupler and remove the hanger cap from the attachment.
•
Push in the button located on the attachment shaft. Align the button with the guide recess on
the power head coupler and slide the two shafts together. Rotate the attachment shaft until the
button locks into the positioning hole.
NOTE:
If the button does not release completely in the positioning hole, the shafts are not locked
into place. Slightly rotate from side to side until the button is locked into place.
•
Tighten the knob securely.
W A R N I N G
Be certain the knob is fully tightened before operating equipment; check it periodically for
tightness during use to avoid serious personal injury.
ATTACHING THE FRONT HANDLE
(See Figure 3.)
Fig.2
POWER HEAD SHAFT
POSITIONING HOLE
KNOB
ATTACHMENT SHAFT
BUTTON
Fig.3
FRONT HANDLE
BOLT
WASHER
WING NUT
Содержание 21142
