EN
DE ES IT FR PT NL RU FI SV NO DA PL CS SK SL HR HU RO BG EL AR TR HE LT LV ET
English (original instructions)
WARNING
If any parts are damaged or missing do not op-
erate this product until the parts are replaced.
Use of this product with damaged or missing
parts could result in serious personal injury.
Do not use this product if any parts on the Pack-
ing List are already assembled to your product
when you unpack it. Parts on this list are not as-
sembled to the product by the manufacturer and
require customer installation. Use of a product
that may have been improperly assembled
could result in serious personal injury.
■
Inspect the product carefully to make sure
no breakage or damage occurred during
shipping.
■
Do not discard the packing material until you
have carefully inspected and satisfactorily
operated the product.
WARNING
Do not attempt to modify this product or create
accessories not recommended for use with this
product. Any such alteration or modification is
misuse and could result in a hazardous condi-
tion leading to possible serious personal injury.
WARNING
To prevent accidental starting that could cause
serious personal injury, always remove the bat
-
tery pack from the product when assembling
parts.
Gun Assembly
■ Connect the nozzle to the wand, turn
clockwise until the tabs lock into place to
ensure leak-free
connection.
(See Figure 2.)
■ Connect the wand to the gun handle, turn
clockwise until the tabs lock into place to
ensure a leak-free connection.
(See Figure 3.)
■ Connect the hose into the gun handle, turn
clockwise until the tabs lock into place.
(See
Figure 4.)
Tank Lid Assembly
■ Connect the tank lid to the tank, turn clockwise
until the tabs lock into place.
(See Figure 5.)
Battery Pack Assembly
How to charge the battery
(See Figure 6-8.)
■
Open the door of the battery housing.
■
Press the button and take out the battery.
■
Slide the battery into the charger slots until it
locks into place.
■
Insert charger plug to the power supply.
Note: The battery is fully charged when the light
turns from red to green.
How to remove the battery
(See Figure 9.)
■
Unplug the battery charger.
■
Press the button and take out the battery.
How to insert the battery into the sprayer
(See Figure 10.)
■
Open the battery compartment door.
■
Slide the 24V Lithium-Ion Battery into the
Battery Compartment.
OPERATION
Adding Solution
(See Figure 11.)
■ Mix solution in a separate container,
following the chemical manufacturer’s
guidelines.
■
Pour pre-mixed solution into the sprayer and
firmly screw the Tank Lid on.
Note: Always lubricate the seal on the lid and
the valve. It will help extend the life of the seal,
and is important to properly maintain so no leaks
form.
Operating the Sprayer
(See Figure 12-13.)
■
Press ON ( I ) on the switch to start the motor.
■ Place the sprayer on your back, turn on the
power switch, then press the trigger down.
■
Push the lock button backward which is
designed to fix the trigger, saving you much
strength.
■ To stop the sprayer, press OFF( O ) on the
switch.
MAINTENANCE
WARNING
2
