English (original instructions)
EN
DE ES IT FR PT NL RU FI SV NO DA PL CS SK SL HR HU RO BG EL AR TR HE LT LV ET
TROUBLESHOOTING
PROBLEM
POSSIBLE CAUSE
SOLUTION
String will not advance when using
the bump-feed head.
String is welded to itself.
Lubricate with silicone spray.
Not enough string on spool.
Install more string. Refer to string
replacement earlier in this manual.
String is worn too short.
Pull string while pressing line release
button.
String is tangled on spool.
Remove string from spool and rewind.
Refer to string replacement earlier in this
manual.
Grass wraps around shaft housing
and string head.
Cutting tall grass at ground level. Cut tall grass from the top down to prevent
wrapping.
Motor fails to start when switch trigger
is depressed.
Battery is not secure.
To secure the battery pack, make sure the
latch on bottom of the battery pack snaps
into place.
Battery is not charged.
Charge the battery pack according to the
instructions included with your model.
Shaft not connected completely.
Make sure lower shaft is fully seated in
shaft coupler on upper shaft and secure
shaft coupler.
5