GreenWorks Pro ULTRAPOWER PW60L00, Руководство оператора

Страница: 10 / 28

9.2.1 NOZZLE TYPE
SPRAY TIP APPLICATION
15
O
Yellow - Narrow fan tip (15° )
• The yellow pressure washer tip pro-
vides high versatility with its 15 de-
gree angle tip. Referred to as the
washing tip, because it provides ade-
quate pressure to remove dirt from
surfaces, but is designed to not dam-
age many surfaces. This pressure
washer tip is designed for “sweep-
ing” foliage or debris given its wide
angle. This tip is versatile due to its
wide area of cleaning and strong
pressure application.
40
O
White - Wide fan tip (40° )
• The white 40 degree tip, referred to
as the “fan” tip creates the widest
area of cleaning with relatively low
pressure. This pressure washer tip is
best used for light or delicate clean-
ing applications. It is recommended
for light cleaning on wood decks and
other soft or delicate surfaces.
10 INSTALL THE DETERGENT
TANK
9
WARNING
Do not use household detergents, acids, alkalines, bleaches,
solvents, flammable material, or industrial grade solutions,
which can do damage to the pump.
WARNING
Do the instructions on the solution bottle to prepare
detergent.
NOTE
If it is necessary, use a funnel to prevent the spill of
detergent. Clean and dry the spilled detergent when you fill
it.
1. Put the detergent into the detergent tank (21).
2. Install the detergent tank onto the spray gun (9).
3. Turn counter-clockwise the spray gun (9) to tighten.
NOTE
Do not let detergent dry on the surface to prevent streaks.
11 START THE MACHINE
CAUTION
Do not operate without the water supply connected.
CAUTION
Before you start the machine:
1. Turn the water supply on.
2. Pull the spray gun trigger (10) to release air pressure.
3. If a stable stream of water come into view, release the
gun trigger (10).
1. Set the power switch to the “ON” ( | ) position.
2. Pull the spray gun trigger (10).
12 STOP THE MACHINE
1. Release the spray gun trigger (10).
2. Set the power switch to the "OFF" (O) position.
WARNING
If you do not use the machine
：
• Stop the machine.
• Turn the water supply off.
• Remove the battery pack.
• Pull the spray gun trigger (10) to release the remaining
pressure from the machine.
• Lock the trigger safety button (14).
10
English
EN
21