manualshive.com logo in svg

GreenWorks Pro 7406102, Руководство оператора

Поделиться
Скачать
GreenWorks Pro 7406102 Скачать руководство пользователя страница 12

2-1

2-2

2-3

11.1.4 INSTALL THE BATTERY PACK

Mower batteries must be charged overnight before first use.
To verify mower batteries are fully charged, check the battery
level indicator. See the battery manual for more details.

Seat

Battery

Battery 

compartment

1. Lift the seat panel.
2. Lift the battery compartment cover.
3. Install the battery pack into the battery compartment.

 

NOTE

Make sure that you install at least one battery in each
column.

11.1.5 BEFORE OPERATING THE MACHINE

•

Ensure work area is clear of children, bystanders, and
pets.

•

Clear the work area of objects that may be thrown by the
mower blades.

•

Check brake operation.

•

Check tire pressure.

•

Check for loose fasteners.

•

Check to make sure all guards are in place and working
properly.

•

Clean debris from mower.

•

Test safety interlock system.

•

Adjust seat to desired position.

•

Verify battery charge level.

11.1.6 SAFETY START INTERLOCK SYSTEM

The machine is equipped with a safety start interlock system
consisting of the park brake switches, seat switch, and deck
blades ON and OFF switch.

The mower’s safety start interlock system is also designed to
protect the operator and others from accidental injury due to
unintentional traction drive system starting.

Check mower safety start interlock system daily, prior to
operation. This system is an important mower safety feature.
It should be repaired immediately if it malfunctions. The
machine incorporates a separate seat switch which will stop
the drive system and deck motors when the operator is
unseated for any reason while the mower is operating. This is
a safety feature designed to prevent runaway or accidental
entanglement.

 

WARNING

The safety interlock system must not be disconnected or
bypassed. Doing so could cause the machine to operate
unexpectedly, resulting in personal injury.

To inspect the system:

1. The operator must be on the seat when testing the seat

switch.

2. Turn the key to the ON position.
3. Pull the steering control levers to the neutral position.
4. Pull up on the PTO switch to engage the motor.
5. Slowly raise off of the seat. The deck blade system should

stop.

6. If the deck blade system fails to stop when the operator is

off of the seat and if the cause cannot be determined,
contact your Greenworks dealer immediately.

10

English

EN

P0803155-00 v1.3

Содержание 7406102































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды