Like most appliances, your water dispenser requires periodic maintenance for maximum efficiency and performance
and must be cleaned on a regular basis (i.e. every 4 months). To maintain a hygienic environment within your water
dispenser and prevent potential formation (growth) of bacteria, we strongly recommend regular cleaning. A Greenway
®
cleaning kit is available through our Customer Service Department at
1-866-253-0447 or can be ordered on line at
www.greenwayhp.com.
IMPORTANT: Always unplug the dispenser before performing any of the following cleaning procedures.
The outside of the dispenser can be wiped clean with a mild soap and water mixture. Never use harsh chemicals or
abrasive cleaners. Rinse thoroughly with clean water and then dry surfaces.
To remove the drip tray and grill, pull the drip tray forward until it releases from the cabinet. Drain any excess water and
clean. To replace, put the grill back on the tray and re-install into the hole openings in the cabinet.
Note: The drip tray and grill are not dishwasher safe. (Hand wash only)
The drip tray should be emptied and cleaned regularly to remove spotting and
any mineral deposits. Clean with Greenway
®
water dispenser cleaning solution
or a mild soap and water mixture. For tough deposits, add vinegar and let it
soak until the deposits come loose. Then wash, rinse and dry thoroughly.
Vacuum or sweep away the dust from the condenser coils at the back of the
dispenser. For best results, you can purchase a brush designed specifically for
this purpose from your local appliance store. This will improve cooling
and efficiency.
Drain the reservoirs before and after cleaning, when going on long vacations or
if not using the dispenser for long periods of time.
IMPORTANT! Unplug the dispenser before performing this procedure.
Dispense hot water until temperature drops to a safe level to avoid the risk of
scalding.
1. Remove the water bottle.
2. Press both dispensing taps until water no longer comes out.
3. Place a bucket beneath the drain valve on the back of the dispenser.
4. Remove the cap and plug from the drain valve and let the water flow into the bucket. Replace the cap and plug.
(A screwdriver or coin can be used to help loosen the drain cap.)
4
grill
drip
tray
5
Cleaning Your Water Dispenser
Cleaning the Outside of the Water Dispenser
Cleaning the Drip Tray
c
Leaning
and
m
aintenance
Cleaning the Condenser
Condenser
coils
Drain
Valve
Draining the Reservoirs
