3
I
nTroduCTIon
Read this entire service guide before beginning installation.
This Reverse Osmosis Drinking Water System has been designed for quick and simple installation and
maintenance. By carefully reading this instruction manual and following the operational guidelines
you will insure a successful installation and reliable operation. Routine maintenance is essential to
the longevity and performance of the system. Filters should be changed every six to twelve months
depending on the quality of the feed water supply.
CAUTION
DO NOT USE THIS SYSTEM WHERE THE WATER IS MICROBIOLOGICALLY UNSAFE OR OF UNKNOWN
QUALITY. THIS SYSTEM IS FOR USE ON POTABLE WATER ONLY. SOURCE WATER EXCEEDING CHEMICAL
PARAMETERS REQUIRES PRETREATMENT.
CONDITIONS FOR OPERATION
Source water Supply - TFC
Community / Private
Non-Chlorinated
System Pressure
30- 100psi
Temperature
4
˚
- 38˚C (40˚ - 100˚ F)
pH Range
3.0 to11.0
Maximum Supply TDS Level 2000mg / L
Turbidity
<1.0 net turbidity (NTU)
Chemical Perimeters - TFC
Hardness
<350mg / L (<20gpg)
Iron (Fe)
<0.1mg / L
Manganese (MN)
<0.05mg / L
Hydrogen Sulfide (H
2
S)
0.00mg / L
Chlorine (CL
2
)
0.00mg / L
TFC - Thin Film Composite