GreenTec HXF 2302, Руководство пользователя

Страница: 23 / 44

GreenTec
HXF 2302 23
Mounting/dismounting with RI-60 or 80
Mounting the tool must be done at a plane and safe surface.
Always pay close attention when mounting the tool to the machine; make sure that no
persons are within range of the saw/blades, as these can cause injuries even when
stationary.
Never use the tool on an unstable or non suitable vehicle.
Mounting to an arm system or similar:
Tools can be mounted to the arm system with a Quickshift. GreenTec HXF 2302 is
specially designed to fit onto Quadsaw LRS 1402, Cutter bar HL 150-180 and Rotary
Mover RI-60-80.
HXF is a system designed to be mounted on tractors, telescopic loaders and compact
loaders. It has a range of approx. 160 cm from the centre of the compact loader, a
180° manual folding system and hydraulic anti collision. The total weight of the unit is
65 kg without tools. If necessary, ballast can be mounted on the vehicle or the arm
system to ensure stability and balance during any work or working conditions.
1.
Approach slowly. Adjust the angle to HXF. Compact loader and HFX are connected.