GreenTec HXF 2302, Руководство пользователя

Страница: 40 / 44

GreenTec
HXF 2302
40
Pins and bushes
All main pivot points are furnished with replaceable bushes. If there are any signs of
wear, these must be replaced. All bushes are available from GreenTec’s Parts
Department.
Fejl! Bogmærke er ikke defineret.
Storage
Before storing away, thoroughly wash the machine removing all traces of grass and
dirt. Great care must be taken when washing with high-pressure hoses, do not hold the
water jet close to the paintwork. Use steam cleaners with caution; be sure to remove
all detergents to avoid any discolouring or damage to paint. Grease all grease points
until fresh grease shows. It is important where possible to store undercover to protect
against rain and sunlight. Always ensure a firm level surface. Control levers must be
wrapped in plastic sheeting and taped over to keep dry.
Fejl! Bogmærke er ikke
defineret.
Option: Joy stick and electrical equipment, which are NOT water tight, must be
wrapped in plastic to keep them dry. Or dismounted.
Remember regular maintenance will greatly increase the life of
the machine.
Warning!
Do not use grease containing Molybdenum disulphide on
nylon bushes and wear pads.
Warning!
Before you attempt to do any repairs, service, maintenance
or adjustment on your machine, ensure that the engine has
stopped and the key is removed. PTO is disengaged, hand
brake secure and the tool is firmly on the ground.