GreenTec 9990060L-25 Скачать руководство пользователя страница 3

Страница: 3 / 66

BAR

IER
MOWER R

I 6

–

BARRIER MOWER RI 60

–

INSTRUCTION MANUAL

3. EDITION

–

SEPTEMBER 2021

ORIGINAL EDITION

! IMPORTANT !

This GreenTec RI Barrier Mower must be mounted on an approved vehicle with an approved GreenTec
multi carrier for proper operation

It is important that the operator is given a document about

"technical documentation and registration

of the machine"

as well as the instruction manual for the attachment tool before the machine is put

into use for the first time.

It is important that the operator fully understands the contents before using the machine.

This instruction manual must accompany the machine and must always be available to the operator.

In case of later resale of the machine, the instruction manual must go with the new owner.

The content of the instruction manual is based on information, standards and regulations, valid at the
time of publication.

As our products are under continuous development and improvement, there may be changes in the
specifications.

If there is information that differs from the current machine, updated instructions can be found on our

webpage

or b contacting

GreenTec - Aftersales

department at:

[email protected]

MANUFACTURER, NAME AND ADDRESS

(a)

Merkurvej 25

DK-6000 Kolding

Danmark

Tel: +45 75553644

Fax: +45 75554243

E-mail:

[email protected]

Webadresse:

www.greentec.eu

Содержание 9990060L-25



































































Результаты поиска

Содержание 9990060L-25

Отзывы:

Похожие инструкции для 9990060L-25

Бренды по названию

Популярные бренды

GreenTec 9990060L-25, Руководство пользователя

Результаты поиска

Содержание 9990060L-25

Отзывы:

Похожие инструкции для 9990060L-25

Бренды по названию

Популярные бренды