GreenTec 9990060L-25 Скачать руководство пользователя страница 12 | Manualshive

Страница: 12 / 66

background image

BAR

R

IER

MOWER R

I 6

0

–

80

4

2.

GENERAL INFORMATION

2.1

INSTRUKTIONSBOGENS ANVENDELSE

Read this instruction manual carefully before mounting and commissioning the machine.
If in doubt, contact your local dealer or GreenTec - Aftersales department.

The illustrations in this instruction manual are for the sole purpose of
instructing, informing, and substantiating the general procedures and
instructions.

Illustrations may appear different from the current machine, e.g., by being
fitted with accessories and / or in a different size variant.

2.2

DEFINITIONER AF INFORMATION SIGNS

The following definitions apply to this entire instruction manual:

DANGER!
Warns of a potential situation that could result in death or permanent
disabling injuries if the regulations are not followed carefully!

WARNING!
Warns of a potential situation that could result in partially disabling injuries or
serious bodily injury if the regulations are not followed carefully!

CAUTION!
Warns of a potential situation that could result in serious damage to the
machine or equipment if the instructions are not followed carefully!

NOTICE!
Specific or general information that is deemed important or useful.

2.3

DEFINITIONS, TERMS AND DESCRIPTIONS

Operator

Daily user and/or starter of the machine.

Owner:

Buyer, owner or those responsible for the operation and maintenance.

Attachment tool:

GreenTec attachment tool, machine, or working tool handled and carried by multi
carrier during operation

Multi Carrier:

GreenTec Multi Carrier, support arm, or lift that controls, handles and carries the
attachment tool during operation.

Vehicle:

Machine that transports Multi C attachment tool.

LH + RH:

Left Hand and Right Hand.
These terms are used when the machine is mounted on the vehicle, seen from
behind. These designations are also used when referring to the vehicle.

Table 5

–

Definitions, terms, and descriptions in the instruction manual.

«
...
10
11
12
13
14
...
»

Содержание 9990060L-25



































































Отзывы:

Нет отзывов

Похожие инструкции для 9990060L-25

Бренд: ZOLL Страницы: 84

Бренд: Kaivac Страницы: 29

Бренд: MacDon Страницы: 65

Бренд: NARGESA Страницы: 33

Бренд: MacDon Страницы: 84

Бренд: MacDon Страницы: 89

Бренд: Patton electronics Страницы: 18

Бренд: B-K lighting Страницы: 3

Бренд: IEMCA Страницы: 82

KID 80-IV Touch

Бренд: IEMCA Страницы: 122

Бренд: Calrec Страницы: 92

Бренд: JB-Lighting Страницы: 32

Бренд: Palmer Страницы: 2

Бренд: PAS Systems International Страницы: 24

MARK V Alcovisor

Бренд: PAS Systems International Страницы: 20

Бренд: PARRY Страницы: 14

Бренд: York Fitness Страницы: 36

Бренд: S&C Страницы: 16

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды