����
���
�
�
�
������
��������������
� � � � � �
attach the front brake
Start by twisting the barrel screw and locking ring around so the slots
line up. Squeeze the brake lever to open it up and place the head of the
cable into the lever cradle. Place the black outer cable into the barrel
screw and close the slot by twisting the barrel screw and locking of the
locking ring, hand tight only.
final check
Check all screws & nuts to make sure they are tight.
Check the brakes & steering to make sure they work OK
If you have cable issues with the
cable fixed to the frame, you can
cut that tie and instead attach it to
the steering rod. Place two zip ties
onto the steering rod as shown.
