����
���
�
���
��������������
� � � � � � � �
9
set the steering
Loosen the clamp on the handlebars and adjust them to a comfortable
position. NOTE they need to be done up fairly tight to prevent unneces-
sary movement. Some movement under duress is acceptable in case of
an accident, but they should NOT be used for leverage in getting on or
off, or in pedalling.
Then fit the steering rod on to the handlebars and to the front forks with
an Allen screw through the rod end at each end. The thicker section with
the bend goes to the rear of the trike, and the bend points in towards
the frame, so that the rod is closer to the frame.
Loosen the clamp on the rod &
adjust the length of the rod until
the front wheel points straight
ahead with the handlebars at
right angles to the main tube.
����
���
�
