Troubleshooting
All Green Marine AWM Series II displays are, prior to packing and shipping, subjected to comprehensive
test and quality assurance programs. However, if this unit should develop a fault,
please refer to the following table to identify the most likely cause and the
corrective action required to restore normal operation. If you still have a problem
after referring to the table below, contact the marine electronics dealer from who you
purchased the product, or contact Green Marine Monitors by clicking on the ''Customer Support'' tab
Common problems and their solutions
Problem
Solution
The display is very dim or dark
Adjust the display as described in “Image adjustment
on ” Section 5 OSD Menu.
The display shows the message ‘No Input’
Check that the video source
i.e. display, camera, DVD etc. is powered and that
the cables are correctly connected.
You have pressed the power button, but the
display does not function.
1. Make sure that the power cable is well connected
and that all connections are tight and free from
corrosion.
2. Check the system fuse.
www.greenmarinemonitors.com.
of our web site at
34
