Greenlee / A Textron Company
2
4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070
EK410 Battery-powered Crimping Tool
All specifications are nominal and may change as design improve-
ments occur. Greenlee Textron Inc. shall not be liable for damages
resulting from misapplication or misuse of its products.
GATOR is a registered trademark of Greenlee Textron Inc.
Blackburn is a registered trademark of Thomas & Betts.
Tellus is a registered trademark of Shell Oil Company.
KEEP THIS MANUAL
Table of Contents
Description ..................................................................... 2
Safety ............................................................................. 2
Purpose of this Manual .................................................. 2
Important Safety Information ..................................... 3–4
Identification ................................................................... 5
Specifications ................................................................. 5
Operation .................................................................... 6–7
Die Selection .................................................................. 8
Connector Selection ....................................................... 8
Maintenance ................................................................... 9
Troubleshooting .............................................................. 9
Illustrations ............................................................. 10–11
Parts List ...................................................................... 12
Description
The EK410 Battery-powered Crimping Tool is a
hand-held, self-contained crimping tool intended to
crimp copper and aluminum cable with KC4-type dies.
Safety
Safety is essential in the use and maintenance of Green-
lee tools and equipment. This manual and any markings
on the tool provide information for avoiding hazards and
unsafe practices related to the use of this tool. Observe
all of the safety information provided.
Purpose of this Manual
This manual is intended to familiarize all personnel with
the safe operation and maintenance procedures for the
following Greenlee tool:
EK410 Battery-powered Crimping Tool
Keep this manual available to all personnel.
Replacement manuals are available upon request at no
charge.
