p. 38/48
Figure 5.20.
Side view of the burner’s main module with detached grate
;
NOTE
: the grate of the burner should be taken out of the burner’s head after the burner has
been cooled down to safe temperature levels, in order to be cleaned thoroughly. It is highly
recommended to use self protecting means and to use tool (for example pincers or any
appropriate tool) in order to handle the grate safely.
At the grate cleaning process, it is necessary to pay attention to clean thoroughly the holes,
which conduct the air though the grate, which will allow efficient combustion process and
optimal air cooling of the grate.
After thorough cleaning of the ash residue out of the burner’s grate, as well as other unburned
fuel particles and/or slagging material, the grate should be carefully installed back on its
initial position. The grate’s installation is made in two steps: first:
incline the grate in order to
direct its extension below the inclined grate of the burner’s main module
, second:
slide the
grate until the gap between the grate and the inclined detail is diminished
;
Combustion head of
the burner’s main
module
Grate of the burner
Inclined grate of the
burner’s main module
