Greencut GS560L, Инструкция по эксплуатации

Страница: 61 / 84

61
EN
PRODUCT USE
PUT IN CHAIN LUBRICATING OIL
ATTENTION : Never work without chain lubricant. If the chain of the chainsaw operates without
lubricant, the sword and chain of the saw may be damaged. It is therefore essential to check the oil
level on the oil level indicator frequently and also every time before starting to use the chainsaw. Use
special oil for chainsaw chains.
1. Clear the surface around the oil plug to avoid contamination.
2. Unscrew and remove the oil tank cap.
3. Pour the oil into the oil tank and check the oil level indicator. Make sure that no dirt gets into the oil tank
during filling.
4. Replace the cap and tighten it. Clean up any spills.
5. A full oil tank will allow you to use the saw for 20-40 minutes.
BATTERY INSTALLATION
1. Place the battery in the chainsaw. Align the raised battery ribs with the slots in the battery port of the
chainsaw.
2. Make sure that the latch on the bottom of the battery locks into place and that the battery is correctly
inserted and secured in the saw before using it.
3
2
1
1
2
1